Midifying Jenny, Step 1: Replacing the old keyboard chip with a Teensy

This is the first post in a series of small projects for retrofitting my JEN SX-1000 monosynth with a simple and cheap MIDI interface controller. Read about the basic idea here. Today, I am designing and building the micro-controller brain of the Jenny retrofit – if you are capable of basic soldering, it should not take you more than two hours and a couple of very common electronic parts.

Weiterlesen

V2.0: A Teensy-based MIDI Controller

Building my own wheels for the Launchpad Pro – once again, with style.

Two weeks ago, I started a little sunday afternoon project, sucessfully building my first own MIDI controller – a pitch bend/mod wheel/midi merge device to serve as a companion to my new Launchpad Pro. Using an Arduino, a prototyping board by SparkFun, and community-made code, I succeeded with surprisingly little effort – the most time-consuming part was finding and fixing the errors I had clumsily soldered into my pathetic excuse for a MIDI interface. But it worked!

Launchpad Companion Controller in actionAs they say, the worst thing that can happen is that you succeed. The quick and easy success made me hungry for more – I started a MIDIfication project for my JEN SX-1000 monophonic synth, based on a Teensy, another microcontroller board that can be used within the Arduino development eco-system but is much better suited to MIDI/USB applications.

V2.0: A Teensy-based MIDI controller

This is actually a side project to that. I looked at my self-made controller and noticed that it is usable but not very playable – I wanted real wheels for the Launchpad, not sliders. So I decided to redo a V2.0 of the controller, based on the Teensy.

Weiterlesen

MIDIfying Jenny – A Call To Arms

Isn’t it about time my beloved Jenny got her own MIDI interface?

JEN SX-1000 front with ATMEGA chip

To be sure, microcontroller-based interfaces for the JEN SX-1000 do exist. Apart from the commercial CV/Gate solutions by Kenton, there is Neil Johnson’s keyboard interface design. But even if you can get hold of the PCB – a supplier in the JEN SX-1000 group on Facebook had a batch made – the design has an intimidating parts list, and takes some serious time to build.

Is it possible to do it simpler? Emboldened by my success building a small Arduino-based MIDI controller, I decided to start a midification effort that is

  • easy to do (requiring only basic soldering skills, if any)
  • easy to get (by using components that you can buy on Amazon if you have to),
  • easy to develop (using standard solutions from the Arduino community),
  • easy to schedule (because the project is divided up into little steps, each of which is a small afternoon sub-project with instant gratification),
  • easy to participate (by contributing own ideas and code for parts of the project).

I will describe the basic layout of the MIDI upgrade kit project here. Each step, i.e. each sub-project, will then be treated in a new post, depending how fast I (or the community) get them done.

Weiterlesen